dpkg 1.23.0 - en to en translation catalogue (64 entries)

en: 
    Configuration file '%s', does not exist on system.
    Installing new config file as you requested.
en: 
    Configuration file «%s», does not exist on system.
    Installing new config file as you requested.

en: 
    Use 'dpkg' to install and remove packages from your system, or
    'apt' or 'aptitude' for user-friendly package management. Packages
    unpacked using 'dpkg-deb --extract' will be incorrectly installed !
en: 
    Use ‘dpkg’ to install and remove packages from your system, or
    'apt' or 'aptitude' for user-friendly package management. Packages
    unpacked using 'dpkg-deb --extract' will be incorrectly installed !

en: %s forcing options - control behavior when problems found:
      warn but continue:  --force-<thing>,<thing>,...
      stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
     Forcing things:
en: %s forcing options - control behavior when problems found:
      warn but continue:  --force-<thing>,<thing>,…
      stop with error:    --refuse-<thing>,<thing>,… | --no-force-<thing>,…
     Forcing things:

en: %s:
        Part format version:            %d.%d
        Part of package:                %s
            ... version:                %s
            ... architecture:           %s
            ... MD5 checksum:           %s
            ... length:                 %jd bytes
            ... split every:            %jd bytes
        Part number:                    %d/%d
        Part length:                    %jd bytes
        Part offset:                    %jd bytes
        Part file size (used portion):  %jd bytes
en: %s:
        Part format version:            %d.%d
        Part of package:                %s
            … version:                  %s
            … architecture:             %s
            … MD5 checksum:             %s
            … length:                   %jd bytes
            … split every:              %jd bytes
        Part number:                    %d/%d
        Part length:                    %jd bytes
        Part offset:                    %jd bytes
        Part file size (used portion):  %jd bytes

en: (Reading database ...
en: (Reading database…

en: +-- Desired=Unknown/Install/Remove/Purge/Hold
    |+- Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    ||+ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
en: ┌── Desired=Unknown/Install/Remove/Purge/Hold
    │┌─ Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
    ││┌ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)

en: ... it looks like that went OK
en: …it looks like that went OK

en: .../%s
en: …/%s

en: Adding '%s'
en: Adding “%s”

en: Authenticating %s ...
en: Authenticating %s…

en: Commands:
      --install <link> <name> <path> <priority>
        [--slave <link> <name> <path>]...
                               add a group of alternatives to the system.
      --remove <name> <path>   remove <path> from the <name> group alternative.
      --remove-all <name>      remove <name> group from the alternatives system.
      --auto <name>            switch the master link <name> to automatic mode.
      --display <name>         display information about the <name> group.
      --query <name>           machine parseable version of --display <name>.
      --list <name>            display all targets of the <name> group.
      --get-selections         list master alternative names and their status.
      --set-selections         read alternative status from standard input.
      --config <name>          show alternatives for the <name> group and ask the
                               user to select which one to use.
      --set <name> <path>      set <path> as alternative for <name>.
      --all                    call --config on all alternatives.
en: Commands:
      --install <link> <name> <path> <priority>
        [--slave <link> <name> <path>]…
                               add a group of alternatives to the system.
      --remove <name> <path>   remove <path> from the <name> group alternative.
      --remove-all <name>      remove <name> group from the alternatives system.
      --auto <name>            switch the master link <name> to automatic mode.
      --display <name>         display information about the <name> group.
      --query <name>           machine parseable version of --display <name>.
      --list <name>            display all targets of the <name> group.
      --get-selections         list master alternative names and their status.
      --set-selections         read alternative status from standard input.
      --config <name>          show alternatives for the <name> group and ask the
                               user to select which one to use.
      --set <name> <path>      set <path> as alternative for <name>.
      --all                    call --config on all alternatives.

en: Commands:
      -i|--install       <.deb file name>... | -R|--recursive <directory>...
      --unpack           <.deb file name>... | -R|--recursive <directory>...
      -A|--record-avail  <.deb file name>... | -R|--recursive <directory>...
      --configure        <package>... | -a|--pending
      --triggers-only    <package>... | -a|--pending
      -r|--remove        <package>... | -a|--pending
      -P|--purge         <package>... | -a|--pending
      -V|--verify [<package>...]       Verify the integrity of package(s).
      --get-selections [<pattern>...]  Get list of selections to stdout.
      --set-selections                 Set package selections from stdin.
      --clear-selections               Deselect every non-essential package.
      --update-avail [<Packages-file>] Replace available packages info.
      --merge-avail [<Packages-file>]  Merge with info from file.
      --clear-avail                    Erase existing available info.
      -s|--status [<package>...]       Display package status details.
      -p|--print-avail [<package>...]  Display available version details.
      -L|--listfiles <package>...      List files 'owned' by package(s).
      -l|--list [<pattern>...]         List packages concisely.
      -S|--search <pattern>...         Find package(s) owning file(s).
      -C|--audit [<package>...]        Check for broken package(s).
      --yet-to-unpack                  Print packages selected for installation.
      --predep-package                 Print pre-dependencies to unpack.
      --add-architecture <arch>        Add <arch> to the list of architectures.
      --remove-architecture <arch>     Remove <arch> from the list of architectures.
      --print-architecture             Print dpkg architecture.
      --print-foreign-architectures    Print allowed foreign architectures.
      --assert-help                    Show help on assertions.
      --assert-<feature>               Assert support for the specified feature.
      --validate-<thing> <string>      Validate a <thing>'s <string>.
      --compare-versions <a> <op> <b>  Compare version numbers - see below.
      --force-help                     Show help on forcing.
      -Dh|--debug=help                 Show help on debugging.
en: Commands:
      -i|--install       <.deb file name>… | -R|--recursive <directory>…
      --unpack           <.deb file name>… | -R|--recursive <directory>…
      -A|--record-avail  <.deb file name>… | -R|--recursive <directory>…
      --configure        <package>… | -a|--pending
      --triggers-only    <package>… | -a|--pending
      -r|--remove        <package>… | -a|--pending
      -P|--purge         <package>… | -a|--pending
      -V|--verify [<package>…]         Verify the integrity of package(s).
      --get-selections [<pattern>…]    Get list of selections to stdout.
      --set-selections                 Set package selections from stdin.
      --clear-selections               Deselect every non-essential package.
      --update-avail [<Packages-file>] Replace available packages info.
      --merge-avail [<Packages-file>]  Merge with info from file.
      --clear-avail                    Erase existing available info.
      -s|--status [<package>…]         Display package status details.
      -p|--print-avail [<package>…]    Display available version details.
      -L|--listfiles <package>…        List files 'owned' by package(s).
      -l|--list [<pattern>…]           List packages concisely.
      -S|--search <pattern>…           Find package(s) owning file(s).
      -C|--audit [<package>…]          Check for broken package(s).
      --yet-to-unpack                  Print packages selected for installation.
      --predep-package                 Print pre-dependencies to unpack.
      --add-architecture <arch>        Add <arch> to the list of architectures.
      --remove-architecture <arch>     Remove <arch> from the list of architectures.
      --print-architecture             Print dpkg architecture.
      --print-foreign-architectures    Print allowed foreign architectures.
      --assert-help                    Show help on assertions.
      --assert-<feature>               Assert support for the specified feature.
      --validate-<thing> <string>      Validate a <thing>'s <string>.
      --compare-versions <a> <op> <b>  Compare version numbers - see below.
      --force-help                     Show help on forcing.
      -Dh|--debug=help                 Show help on debugging.

en: Commands:
      -s, --status [<package>...]      Display package status details.
      -p, --print-avail [<package>...] Display available version details.
      -L, --listfiles <package>...     List files 'owned' by package(s).
      -l, --list [<pattern>...]        List packages concisely.
      -W, --show [<pattern>...]        Show information on package(s).
      -S, --search <pattern>...        Find package(s) owning file(s).
          --control-list <package>     Print the package control file list.
          --control-show <package> <file>
                                       Show the package control file.
      -c, --control-path <package> [<file>]
                                       Print path for package control file.
en: Commands:
      -s, --status [<package>…]        Display package status details.
      -p, --print-avail [<package>…]   Display available version details.
      -L, --listfiles <package>…       List files 'owned' by package(s).
      -l, --list [<pattern>…]          List packages concisely.
      -W, --show [<pattern>…]          Show information on package(s).
      -S, --search <pattern>…          Find package(s) owning file(s).
          --control-list <package>     Print the package control file list.
          --control-show <package> <file>
                                       Show the package control file.
      -c, --control-path <package> [<file>]
                                       Print path for package control file.

en: Commands:
      -s|--split <file> [<prefix>]     Split an archive.
      -j|--join <part> <part> ...      Join parts together.
      -I|--info <part> ...             Display info about a part.
      -a|--auto -o <complete> <part>   Auto-accumulate parts.
      -l|--listq                       List unmatched pieces.
      -d|--discard [<filename> ...]    Discard unmatched pieces.
en: Commands:
      -s|--split <file> [<prefix>]     Split an archive.
      -j|--join <part> <part>…         Join parts together.
      -I|--info <part>…                Display info about a part.
      -a|--auto -o <complete> <part>   Auto-accumulate parts.
      -l|--listq                       List unmatched pieces.
      -d|--discard [<filename>…]       Discard unmatched pieces.

en: Configuration file '%s'
en: Configuration file «%s»

en: Configuration file '%s' (actually '%s')
en: Configuration file «%s» (actually «%s»)

en: De-configuring %s (%s), to allow configuration of %s (%s) ...
en: De-configuring %s (%s), to allow configuration of %s (%s)…

en: De-configuring %s (%s), to allow installation of %s (%s) ...
en: De-configuring %s (%s), to allow installation of %s (%s)…

en: De-configuring %s (%s), to allow removal of %s (%s) ...
en: De-configuring %s (%s), to allow removal of %s (%s)…

en: File '%s' is not part of a multipart archive.
en: File «%s» is not part of a multipart archive.

en: Ignoring request to remove shared diversion '%s'.
en: Ignoring request to remove shared diversion «%s».

en: Ignoring request to rename file '%s' owned by diverting package '%s'
en: Ignoring request to rename file «%s» owned by diverting package ‘%s’

en: Installing new version of config file %s ...
en: Installing new version of config file %s…

en: Leaving '%s'
en: Leaving “%s”

en: MSDOS end of file (Ctrl+Z) in field name '%.*s'
en: MSDOS end of file (Ctrl+Z) in field name «%.*s»

en: MSDOS end of file (Ctrl+Z) in value of field '%.*s' (missing newline?)
en: MSDOS end of file (Ctrl+Z) in value of field «%.*s» (missing newline?)

en: No diversion '%s', none removed.
en: No diversion «%s», none removed.

en: Obsolete conffile '%s' has been modified by you.
en: Obsolete conffile «%s» has been modified by you.

en: Options:
      --admindir <directory>   set the directory with the statoverride file.
      --instdir <directory>    set the root directory, but not the admin dir.
      --root <directory>       set the directory of the root filesystem.
      --update                 immediately update <path> permissions.
      --force                  deprecated alias for --force-all.
      --force-<thing>[,...]    override problems (see --force-help).
      --no-force-<thing>[,...] stop when problems encountered.
      --refuse-<thing>[,...]   ditto.
      --quiet                  quiet operation, minimal output.
      --help                   show this help message.
      --version                show the version.
en: Options:
      --admindir <directory>   set the directory with the statoverride file.
      --instdir <directory>    set the root directory, but not the admin dir.
      --root <directory>       set the directory of the root filesystem.
      --update                 immediately update <path> permissions.
      --force                  deprecated alias for --force-all.
      --force-<thing>[,…]      override problems (see --force-help).
      --no-force-<thing>[,…]   stop when problems encountered.
      --refuse-<thing>[,…]     ditto.
      --quiet                  quiet operation, minimal output.
      --help                   show this help message.
      --version                show the version.

en: Options:
      --admindir=<directory>     Use <directory> instead of %s.
      --root=<directory>         Install on a different root directory.
      --instdir=<directory>      Change installation dir without changing admin dir.
      --pre-invoke=<command>     Set a pre-invoke hook.
      --post-invoke=<command>    Set a post-invoke hook.
      --path-exclude=<pattern>   Do not install paths which match a shell pattern.
      --path-include=<pattern>   Re-include a pattern after a previous exclusion.
      -O|--selected-only         Skip packages not selected for install/upgrade.
      -E|--skip-same-version     Skip packages with same installed version/arch.
      -G|--refuse-downgrade      Skip packages with earlier version than installed.
      -B|--auto-deconfigure      Install even if it would break some other package.
      --[no-]triggers            Skip or force consequential trigger processing.
      --verify-format=<format>   Verify output format (supported: 'rpm').
      --no-pager                 Disables the use of any pager.
      --no-debsig                Do not try to verify package signatures.
      --no-act|--dry-run|--simulate
                                 Just say what we would do - do not do it.
      -D|--debug=<octal>         Enable debugging (see -Dhelp or --debug=help).
      --status-fd <n>            Send status change updates to file descriptor <n>.
      --status-logger=<command>  Send status change updates to <command>'s stdin.
      --log=<filename>           Log status changes and actions to <filename>.
      --ignore-depends=<package>[,...]
                                 Ignore dependencies involving <package>.
      --force-<thing>[,...]      Override problems (see --force-help).
      --no-force-<thing>[,...]   Stop when problems encountered.
      --refuse-<thing>[,...]     Ditto.
      --abort-after <n>          Abort after encountering <n> errors.
      --robot                    Use machine-readable output on some commands.
en: Options:
      --admindir=<directory>     Use <directory> instead of %s.
      --root=<directory>         Install on a different root directory.
      --instdir=<directory>      Change installation dir without changing admin dir.
      --pre-invoke=<command>     Set a pre-invoke hook.
      --post-invoke=<command>    Set a post-invoke hook.
      --path-exclude=<pattern>   Do not install paths which match a shell pattern.
      --path-include=<pattern>   Re-include a pattern after a previous exclusion.
      -O|--selected-only         Skip packages not selected for install/upgrade.
      -E|--skip-same-version     Skip packages with same installed version/arch.
      -G|--refuse-downgrade      Skip packages with earlier version than installed.
      -B|--auto-deconfigure      Install even if it would break some other package.
      --[no-]triggers            Skip or force consequential trigger processing.
      --verify-format=<format>   Verify output format (supported: 'rpm').
      --no-pager                 Disables the use of any pager.
      --no-debsig                Do not try to verify package signatures.
      --no-act|--dry-run|--simulate
                                 Just say what we would do - do not do it.
      -D|--debug=<octal>         Enable debugging (see -Dhelp or --debug=help).
      --status-fd <n>            Send status change updates to file descriptor <n>.
      --status-logger=<command>  Send status change updates to <command>'s stdin.
      --log=<filename>           Log status changes and actions to <filename>.
      --ignore-depends=<package>[,…]
                                 Ignore dependencies involving <package>.
      --force-<thing>[,…]        Override problems (see --force-help).
      --no-force-<thing>[,…]     Stop when problems encountered.
      --refuse-<thing>[,…]       Ditto.
      --abort-after <n>          Abort after encountering <n> errors.
      --robot                    Use machine-readable output on some commands.

en: Package '%s' does not contain any files (!)
en: Package ‘%s’ does not contain any files (!)

en: Preparing to unpack %s ...
en: Preparing to unpack %s…

en: Processing triggers for %s (%s) ...
en: Processing triggers for %s (%s)…

en: Purging configuration files for %s (%s) ...
en: Purging configuration files for %s (%s)…

en: Removing %s (%s) ...
en: Removing %s (%s)…

en: Removing %s (%s), to allow configuration of %s (%s) ...
en: Removing %s (%s), to allow configuration of %s (%s)…

en: Removing '%s'
en: Removing “%s”

en: Removing obsolete conffile %s ...
en: Removing obsolete conffile %s…

en: Replaced by files in installed package %s (%s) ...
en: Replaced by files in installed package %s (%s)…

en: Replacing files in old package %s (%s) ...
en: Replacing files in old package %s (%s)…

en: Saving as %s ...
en: Saving as %s…

en: Setting up %s (%s) ...
en: Setting up %s (%s)…

en: Type 'exit' when you are done.
en: Type ‘exit’ when you are done.

en: Type dpkg --help for help about installing and deinstalling packages [*];
    Use 'apt' or 'aptitude' for user-friendly package management;
    Type dpkg -Dhelp for a list of dpkg debug flag values;
    Type dpkg --force-help for a list of forcing options;
    Type dpkg-deb --help for help about manipulating *.deb files;
    
    Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !
en: Type dpkg --help for help about installing and deinstalling packages [*];
    Use ‘apt’ or ‘aptitude’ for user-friendly package management;
    Type dpkg -Dhelp for a list of dpkg debug flag values;
    Type dpkg --force-help for a list of forcing options;
    Type dpkg-deb --help for help about manipulating *.deb files;
    
    Options marked [*] produce a lot of output - pipe it through ‘less’ or ‘more’ !

en: Unpacking %s (%s) ...
en: Unpacking %s (%s)…

en: Unpacking %s (%s) over (%s) ...
en: Unpacking %s (%s) over (%s)…

en: Usage: %s [<option> ...] <command>
en: Usage: %s [<option>…] <command>

en: Usage: %s [<option>...] <command>
en: Usage: %s [<option>…] <command>

en: Usage: %s [<option>...] <pathname>
en: Usage: %s [<option>…] <pathname>

en: Usage: %s [<option>...] <trigger-name>
           %s [<option>...] <command>
en: Usage: %s [<option>…] <trigger-name>
           %s [<option>…] <command>

en: Use '%s --help' for program usage information.
en: Use ‘%s --help’ for program usage information.

en: Use 'apt' or 'aptitude' for user-friendly package management.
en: Use ‘ap’ or ‘aptitude’ for user-friendly package management.

en: Would remove or purge %s (%s) ...
en: Would remove or purge %s (%s)…

en: considering deconfiguration of %s, which would be broken by installation of %s ...
en: considering deconfiguration of %s, which would be broken by installation of %s…

en: considering removing %s in favour of %s ...
en: considering removing %s in favour of %s…

en: failed to read archive '%s'
en: failed to read archive «%s»

en: filename "%s" is not absolute
en: filename «%s» is not absolute

en: may have trouble removing %s, as it provides %s ...
en: may have trouble removing %s, as it provides %s…

[ctx: query-list-header]
en: +++-
en: ├┼┼─

[ctx: query-list-header]
en: -
en: ─

[ctx: query-list-header]
en: =
en: ═

[ctx: query-list-header]
en: |
en: │

en: trying %s maintainer script from the new %s package instead ...
en: trying %s maintainer script from the new %s package instead…

en: unable to create '%s'
en: unable to create «%s»
